Particle Measuring Systems LASAIR II 310 Operator's Manual page 59

Chapter 5: Setup Chapter 5: Setup
Page 5-12 Page 5-12
Accessing the Alarm Setup Screen Accessing the Alarm Setup Screen
To access the Alarm Setup Screen: To access the Alarm Setup Screen:
Press the Press the first first softkey softkey
1 1
Screen will be displayed. Screen will be displayed.
2 2 Press the Press the Alarm Alarm softkey softkey. .
Figure 5-7: Alarm Setup Screen, Particle Alarms Page Figure 5-7: Alarm Setup Screen, Particle Alarms Page
Alarms Enable/Disable Alarms Enable/Disable
Audio Enable/Disable Audio Enable/Disable
accompany the visual alarms. accompany the visual alarms.
Print on Alarm Print on Alarm
feature. For detail feature. For details, see "Printing s, see "Printing on Alarm" on
Particle Alarms Particle Alarms The particle alarm setup fields. An alarm limit can be set for The particle alarm setup fields. An alarm limit can be set for
each particle channel. Each c each particle channel. Each channel's alarm lim
( ( ). Enabled alarm will activate if the particle coun ). Enabled alarm will activate if the particle count exceeds the set limit. The
0 0
alarm limit set to a differential or total count value. alarm limit set to a differential or total count value.
The analog alarm set up fields. A high and/or low limit for The analog alarm set up
Analog Alarms Analog Alarms
each enabled analog environmental sensor (Analog data information is set up in each enabled analog environmental sensor (Analog data information is set up in
the Analog Data setup screen). Each limit can be enabled or disabled. the Analog Data setup screen). Each limit can be enabled or disabled.
LASAIR II II Operator's LASAIR
on the on the Main Main Display Display Screen. Screen. The
The Alarm The Alarm Setup Setup Screen Screen will
Allows you to turn all alarms ON or Allows you to turn
Determines whether audio alarms will Determines whether audio alarms will
This icon enables or disables the Print on Alarm This icon enables or disables the Print on Alarm
on Alarm" on page page 5-13.
hannel's alarm limit can be enabled it can be enabled ( (
fields. A high and/or low limit for
Operator's Manual Manual
The Sampling Sampling Setup Setup
will open: open:
all alarms ON or OFF OFF. .
5-13.
) or disabled ) or disabled
1 1
t exceeds the set limit. The