Particle Measuring Systems LASAIR II 310 Operator's Manual page 216

• • If the TCP/IP address is different, a message is displayed showing the new If the TCP/IP address is different, a message is displayed showing the new
TCP/IP address and the new location. The user is allowed to select TCP/IP address and the new location. The user is allowed to select OK
Cancel Cancel . See Figure . See Figure M-3, "Dialog Box when M-3, "Dialog Box when TCP/IP address is
page M-7. page M-7.
• • If user selects
If user selects Cancel Cancel , nothing is loaded.
• • If user selects
If user selects OK OK , processing continues as follows: , processing continues as follows:
➢ ➢ If old data is in the LASAIR II, then an error message says: If old data is in the LASAIR II, then
"TouchRAM conflict. Data on box "T ouchRAM conflict. Data on box must be erased before loading ne
TCP/IP address". T TCP/IP address". TouchRAM information is not
4, "Dialog Box when TCP/IP address 4, "Dialog Box when TCP/IP address cannot be changed," on
➢ ➢ If no data is stored in the LASAIR II database, If no data is stored in the LASAIR II database, all old location names in
the database will be erased. The the database will be erased. The LASAIR II will then:
➢ ➢ load the new location name and sampling parameters load the new location name and sampling parameters
➢ ➢ set the new TCP/IP address set the new TCP/IP address
➢ ➢ reboot the box to load the addresses. When LASAIR II reboot the box to
ready to take a sample. ready to take a sample.
Figure M-3: Dialog Box when TCP/IP address is changed Figure M-3: Dialog Box when TCP/IP address is changed
LASAIR II Operator's Manual LASAIR II Operator's Manual
Rules for Reading TouchRAM Buttons Rules for Reading TouchRAM Buttons
TCP/IP address is changed," on
, nothing is loaded.
an error message says:
must be erased before loading new w
ouchRAM information is not loaded. See Figure
cannot be changed," on page
LASAIR II will then:
load the addresses. When LASAIR II reboots, it is
OK or or
changed," on
loaded. See Figure M- M-
page M-8. M-8.
all old location names in
reboots, it is
Page Page
M-7 M-7