Particle Measuring Systems LASAIR II 310 Operator's Manual page 158

Particle counter
Hide thumbs Also See for LASAIR II 310:
Table of Contents

Advertisement

   
Web Browser Interface
Web Browser Interface
 Appendix B
 Appendix B
 Connecting to a Computer or Network
 Connecting to a Computer or Network
This appendix describes how to establish communications between
This appendix describes how to establish communications between your
LASAIR II and a laptop or desktop PC. This involves setting up network
LASAIR II and a laptop or desktop PC. This involves setting up network
 parameters on the LASAIR I
 parameters on
the LASAIR II and perhaps
attached to the local network.
attached to the local network.
Hardware Requirements
Hardware Requirements
Y Y our connecting
our connecting computer must meet the
computer must meet the following requirements:
• • The computer must have a network card.
The computer must have a network card. Y Y ou can use any co
one of the three common operating systems; Wi
one of the three common o
• • If the computer is a pa
If the computer is a palm-size or hand held device,
Windows CE operating system.
Windows CE operating system.
Software Requirements
Software Requirements
Y Y our computer must have ha
our computer must have have one of the
loaded on its hard drive:
loaded on its hard drive:
• • Microsoft Internet Explorer, version 5.0 or higher 
Microsoft Internet Explorer, version 5.0 or higher 
• •  Netscape Communicator, version 4.61 or higher 
 Netscape Communicator, version 4.61 or higher 
Browser software can be
Browser software can be downloaded from: www.microsoft.com or:
www.netscape.com.
www.netscape.com.
Cable Requirements
Cable Requirements
If you are connecting
If you are connecting your LASAIR II to a computer d
will need the appropriate cabling.
will need the appropriate cabling.
• • If you are connecting from the
If you are connecting from the LASAIR II directly to a computer, use a
crossover    cable or
crossover 
 cable or adapter.
• • If you are connecting the unit to a hub or other device on an Ethernet
If you are connecting the unit to a hub or other device on an Ethernet
network, use a
network, use a straight-thr
 straight-through
the hub as well as from the
the hub as well as from the hub to the computer.
L L A A S S A A I I R R I I I I O O p p e e r r a a t t o o r r ' ' s s M M a a n n u u a a l l
I and perhaps on the PC
on the PC as well,
following requirements:
ou can use any computer that runs
perating systems; Windows, UNIX, or Apple.
lm-size or hand held device, it must run the Microsoft
ve one of the following browser software packages
following browser software packages
downloaded from: www.microsoft.com or:
your LASAIR II to a computer directly or indirectly
LASAIR II directly to a computer, use a
adapter.
ough Ethernet cable between the LASAIR II and
 Ethernet cable between the LASAIR II and
hub to the computer.
your
as well, if it
if it is not alr
is not already
eady
mputer that runs
ndows, UNIX, or Apple.
it must run the Microsoft
irectly or indirectly, you
, you
P P a a g g e e B B - - 1 1

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Particle Measuring Systems LASAIR II 310

Table of Contents