System Information; Conditional Access System - Strong SRT 4935II User Manual

6. Operation

6.6 System Information

6.7 Conditional Access System

➊ Card Initializing
To Enjoy CONAX scrambled channels, you will need a Smart Card from the service
provider (program distributor). If you are subscribing to services from more than one
service provider, you will need a Smart Card from each one. Since a Smart Card is
connected to a single service provider, a limited range of channels will be available via it.
✽ Note : Without the Smart Card, you can watch only Free-To-Air programs.
➋ The Status of the Smart Card
You can access detailed information about the Smart Card using the
Menu to select Conax CA and pressing OK.
✽ Note : Further detailed information is not mentioned in this manual since the information
depends on the Smart Card in use.
[2015.06.15]SRT4935Ⅱ Manual_english+French_NIG_rev1.0.indd 21
Your receiver displays current information <Figure 6.6.1>
regarding model name, software version and date of
manufacture. This info is useful when downloading new
software.
Please note if you have performed a software update you
must also perform a factory reset of the receiver. Please
see Database Reset section in the Systems settings menu
for instruction on page 16.
Figure 6.6.1
1. Insert the Smart Card into the receiver
2. The message Smart Card Initializing will appear on the
screen. <Figure 6.7.1>
3. You will be able to watch
the channels offered by the service provider.
Figure 6.7.1
English
keys in the Main
21
2015-06-16 오후 2:21:51