Operation; Changing Channels; Accessing The Electronic Programme Guide (Epg); Accessing The Favourite Channels - Strong SRT 5302 User Manual

6.0 oPERATIoN

6.1 Changing Channels

There are 4 ways of channel selection: stepping through the channel list, selection by number, from
the on-screen channel list and using the Electronic Programme Guide (EPG).
Stepping through the channel list
To move through the channel list, use the pq buttons on the remote control.
Selection by direct channel number input
Enter the channel number directly by using the numeric buttons, and press the oK button to select
the channel.
Selection by on screen channels list
You can also select a channel directly from the on screen channel list. To call up the channel list, press
oK in viewing mode. Alternatively, the list can be displayed using the receiver's main menu. See
chapter 5.1.1 Tv Channel list in this manual for operation details.
Selection via EPg
You can also select a channel directly from the Electronic Programme Guide (EPG).
To display the EPG, press EPg on the remote control. See chapter 6.2 below for details.

6.2 Accessing the Electronic Programme guide (EPg)

1. Press EPg to enter the EPG menu.
2. Use the numeric button 2 to switch the highlight between channel list, events
schedule of the selected channel and now/next events.
3. In the event schedule, press the numeric button 3 to book a timer for the highlighted
event. Press oK to open the Detail menu for the selected event.
4. Press the numeric button 1 to open the booking list menu.

6.3 Accessing the favourite channels

1. In viewing mode, press fAv to enter the favourite group menu.
2. Use pq to select a favourite group.
3. Press oK to enter the favourite channels list, and use pq to select a channel.

7.0 TRoUBlE ShooTINg

There may be various reasons for abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact
your local Service line or STRONG dealer. Alternatively you can send a support mail via our website:
www.strong.tv. Do NoT open the receiver cover. It may cause a dangerous situation and will void
the warranty.
Problem
LED indicator not lit,
12
Possible cause
Mains lead unplugged
What to do
Check mains plug
PART 1 • English