4. Controls/Functions
4.1 Front Panel
❶ ❸
❷
❹
❺
❻
❶ Standby/Power on Indications Lamp: Flashes red light in 'Standby' mode and
shows no light in 'Power ON' mode.
❷ Power: Switches the receiver between 'Standby' and 'Power ON' modes.
❸ - ❹ CH. (▲/▼): To switch channels or change the cursor position
❺ Smart Card Reader: Insert smart card for encrypted channel access.
❻ USB: 1USB A -type (USB2.0)
4.2 Rear Panel
❼
❶ ❷
❽
❹ ❺
❸
❻
❾
❿
❶ LNB INPUT: IF input from LNB to digital tuner
❷ LOOP OUT: IF loop-through output from digital tuner
❸ VIDEO: Composite video output
❹ AUDIO L: Left audio output
❺ AUDIO R: Right audio output
❻ S/PDIF: Digital audio output(Coaxial)
❼ USB: 1USB A -type (USB2.0)
❽ HDMI: Digital Video/Audio Output
❾ RF OUT UHF 21-69: Output to TV
❿ TV ANT IN: Input from terrestrial antenna
6
[2015.06.15]SRT4935Ⅱ Manual_english+French_NIG_rev1.0.indd 6
2015-06-16 오후 2:21:44