Strong SRT 4935II User Manual page 25

6. Operation
➋ Trick Mode
You can operate the trick mode while you are playing the recorded files.
These functions are available in playback mode or time-shift mode powerfully.
▣ PLAY
This button will display a time- banner.
If you want to show the play list while playing the file by using
▣ PAUSE
This button will pause the playing file until you play again with
▣ ADVANCE
▪ If the time-shift mode is enabled, You can press
▪ If the playback mode is enabled, You can press
then jumping the live program.
▣ FF(Fast Forward)
▪ When playing the file, you can press
▪ The speed will change to x2, x4, x8, x16 and x32.
▣ RWD(Rewind)
When playing the file, you can press
The speed will change to x2, x4, x8, x16 and x32.
▣ Slow(1/2x, 1/4x, 1/8x)
When playing the file, you can press
▣ Jump
▪ You can locate the control position to the desired position by using the
▪ If you press this key continuosly, You can locate the control position to the desired
position very quickly.
▣ Skip
▪ You can skips and forward using the
▪ You can skips and backward using the
▪ The default time of skip is 30 seconds.
✽ Note: Jump & Skip used only playing at the time-bar.
[2015.06.15]SRT4935Ⅱ Manual_english+French_NIG_rev1.0.indd 25
.
to jump the live program.
to stop the current playing file and
to adjusting the playing speed.
to adjusting the playing speed.
to adjusting the playing speed.
or TIMESHIFT button.
.
2015-06-16 오후 2:21:54
English
25