Strong SRT 4935II User Manual page 12

6. Operation
➌ Satellite Scan
Through this function, the receiver searches for all the available channels
12
[2015.06.15]SRT4935Ⅱ Manual_english+French_NIG_rev1.0.indd 12
▣ Auto Scan <Figure 6.1.4>
1. You can select satellites by pressing the
and OK button on the remote.
▪ Search Type:
▫ All: To search all the Free To Air and scrambled channels,
TV & Radio channels.
▫ Free: To search Free To Air channels only.
▫ TV: To search TV channels only.
▪ Network Search: Select Network Search ON/OFF
Figure 6.1.4
to find more transponders through NIT Search.
2. Move to highlight to "Press OK" and press OK
to scan.
▣ Blind Scan <Figure 6.1.5>
1. Select the satellites you want to search by pressing
the OK button
2. Press ,
▪ TP: Select TP Frequency
▪ Polarization: Select among All / Vertical /
Horizontal
▪ Mode: Select among All / Free / TV
Figure 6.1.5
▣ Manual Scan <Figure 6.1.6>
1. Select a transponder.
2. To change a transponder's information (Frequency,
Symbol Rate), use the NUMERIC buttons.
3. To add a new transponder, press the GREEN button.
4. To delete a transponder, press the YELLOW button
5. To search a transponder, set its different parameters
and press RED button.
Figure 6.1.6
to set the parameters
2015-06-16 오후 2:21:48
button