Input | Output | Overview - RGBlink GX2L User Manual

4.3.2 Input | Output | Overview

Input
Note:The signal port in operation is shown in green, and the signal port that has been connected but not in
operation is not shown.
Standard Resolution
GX2L/GX4L
3. Click
figure：
4. Click the device you need in the <All Devices>
list,and click
show in the main interface.
Click any input port, the board where the port locates is
selected. Users can do settings to the port now.
A red rectangle flashes around the chosen port when it is
clicked.
Standard resolution can be select as shown follow;
800×600@60|1024×768@60|1280×768@60|
1280×800@60|1280×1024@60|1366×768@60|
1440×900@60|1440×1080@60|1600×576@60|
1600×900@60|1600×1000@60|1600×1200@60|
1680×1050@60|1728×1298@60|1920×1080@60
User Manual
to enter interface as shown in the left
in<Chosen Devices>,then GX4L will
28