Table of Contents
Advertisement
Chapter 2 Install Your Product
Note: Since GX2L and GX4L only have the difference in the number of output network ports, other functions
and operations are the same.Therefore, GX4L is taken as an example to introduce in the following chapters.
2.1 Connect the Sources
Connect signals to the product (ensure all devices are powered off first).
Tighten connector screws/locks where provided.
2.2 Connect the Power
Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.
2.3 Turn on Your Product
Press the power button.
TFT screen shows as below,meanwhile the device enter initializing state after that,the device will load the
previously saved setting. On delivery,the default input is HDMI.
GX2L/GX4L
User Manual
12
Advertisement
Table of Contents
