Upgrade - RGBlink GX2L User Manual

4.5 Upgrade

GX2L/GX4L
1
2
3
9. After <Smart Settings>,it will return to <Receiving
card>interface and set a new parameters for receiving
cards.
①Fill in the total Width/Height of box.
There is no need to adjust other parameters if the image
of the single receiving card is normal.
② It is recommended to change "grayscale series" and
"low ash effect" to change the refresh rate.
③ Send to receive card:Each time you change the
parameters, you can click "Send to receive card" and
observe the change of the screen.
4
④ Save to the receive card:After debugging,click "Save
to the receiving card" and the data will not be lost after
power off and restart.
1. Click "Setup" -- "Hardware upgrade".
2. Type in password "admin" or 168.
User Manual 41