RGBlink GX2L User Manual page 37

Authorization Setting
GX2L/GX4L
Slave Unit：
Click Slave Unit
Slave Unit is to control multiple devices simultaneously, which
are connected to same network. ("In the same network"
means that the the third section in the IP address digits are
the same ) XPOSE do operation on one device, same
operation synchronized to other devices. For example, there
is another devices linked to the same network, one with IP
IP192.168.0.45
1. Set device numbers；
2. Select the IP of the device in the drop-down menu for
Device IP
3. click ON,the tow device are connected when the red pot
turns to be green one
4. click OFF to disconnect, it could not control two device at
the same time.
Management
New:Add new USER NAME and PASSWORD
Click the green block to remove the function not to be
permitted.
Click "new",type in User Name and Password.
Edit: Edit user name and password already built.
Delete: Delete user name and password already built.
Permission: functions on this XPOSE 2.0 on this computer
that the users are allowed to operate.
User Manual
.
37