How To Switch Between Input And Output Channel; How To Switch One Input To All Outputs - RGBlink DXP D0808 Quick Start Manual

How to Switch between Input and Output Channel

User can switch the signals between input and output channel by front panel buttons of
DXP D0808, specific operations are as follows:
1. If choose "AUTO TAKE ON", push any button on output area on the front panel, for example,
choose [5] as the output channel.
Then push any button on Input area on the front panel, for example, choose [3] as the input
channel, the signal of output channel 5 will be switched to the signal of input 3.
2. If choose "AUTO TAKE OFF", push any button on output area on the front panel, for
example, choose [5] as the output channel.
Then push any button on input area on the front panel, for example, choose [3] as the input
Channel. After setting, push the [TAKE] button to confirm.
Note: Input channel: The signal that will be switched to output channel.
Output channel: The signal that connected to display device.
The number [1]~[8] means channel 1~8.

How to Switch One Input to all Outputs

1. If choose "AUTO TAKE ON", push the [ALL] button on the front panel.
Then push any button on input area on the front panel, for example, choose [3] as the input
channel, all the signal of output channel will be switched to the signal of input 3.
2. If choose "AUTO TAKE OFF", push the [ALL] button on the front panel.
Then push any button on Input area in the front panel, for example, choose [3] as the input channel.
Push the [TAKE] button to confirm, all the signal of output channel will be switched to the signal
of input 3.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
7
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925771202
http://www.rgblink.cn