Table of Contents
Advertisement
Output | Input | Overview
Connect the Device
After Topology Diagram is finished, users can move to next step, the exact setting on each input
and output board.
Clich icon
and enter the operation interface.
First, choose the device from All Devices for example X14 SN:3344
Then click icon
behind X14 in Chosen Device,IP and SN of this device is shown on the left
top corner of the interface
,which indicates that the device is connected to the
computer and it can be operated by XPOSE2.0 from now on.
© Xiamen RGBlink Science & Technology Co., Ltd.
16
16 / 52
Ph: +86 592 5771197 |
|
support@rgblink.com
www.rgblink.com
Advertisement
Table of Contents
