RGBlink GX2L User Manual page 21

1. Voice Control
Audio
Volume
2. Screen Settings
Cabinet Rows
Cabinet Columns
Port 1 Control cabinet
Cabinet Link Mode
3. Load RCG File
RCG1
RCG2
RCG3
RCG4
RCG5
RCG6
4. USB Play Settings
Media Type
GX2L/GX4L
Audio:Enable/Disable
Disable
Volume Range: 0～100
100
The Requirements of screen settings:
1
(1) The display screen is a regular display screen, rather than
1
a special-shaped screen;
1
>>
(2) The display box is regular, and each is the same size of the
same resolution;
(3) There are several connection ways among cabinets.Each
network port can be connected downward in the same
direction, and can not be wired at will.
(4) When setting cabinet link mode,it is necessary to ensure
that port 1 is the starting position.
The operation steps are the same as the 3.3.2
Load the RCG files,which are set and saved in XPOSE in
advance.
Media Type:video/picture
Video
U Disk Capacity:unlimited
Supported Format:FAt32
Operation Steps:
Press the USB button in the front panel, and it will jump to
the <USB Play Settings> interface.
It will play the video files in order.
User Manual
21