Table of Contents
Advertisement
3.3.3 Output|Input|Overview
Click
to check rear panel interface as shown in
the right figure.
Note:
1.
purple tip indicates input,
2. Interface Color Description: 1) Green: normal signal; 2) Yellow: abnormal signal; White: no signal.
Device Connection
1. Click the device you need in the <All Devices>
list.
2. Click
in the <Chosen Device>.
Output Setting
Click any output port, the board where the port
locates is selected. Users can do settings to the port
now.
A red rectangle flashes around the chosen port
when it is clicked.
Note: Please check first to make sure that the model chosen in Find Device, and communication type in
Communication Setting are both correct.
Resolution:
Users can choose Standard Resolution or Custom
Resolution.
1.
Standard Resolutions can be chosen from
1024×768@75 to 7680×1080@60
right figure.
2. D8 supports to customize output resolution. Click
output port and type in Width, Height and Refresh
Rate.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
blue tip indicates output,
as shown in the
yellow tip indicates communication.
35
Advertisement
Table of Contents
