RGBlink GX2L User Manual page 40

GX2L/GX4L
6. Users can
automatically", and click 1/2/3/4 to change the display
state according to the observation of the LED screen.
For example,click "1" and observe the color of LED
screen,and select "red" if the LED screen shows red.
After all 4 states being done,click "next"
8. Select "horizontal or vertical lines" according to the
actual bright line direction of display screen.
Number of bright rows on display:according to the LED
screen
Number of spaced rows:When only one line is lit on the
screen,the number of rows between must be selected.
7. Observe the position of the bright spot on the first
module of the LED screen, and click the corresponding
grid.
If you make a mistake,click "back" to the last step or
"reset" to restart.
If you select "Profiled lamp board(with taps)" in 5th
step,you need to click blank spots.Observe the first
module,and click "unbright spot(blank spot)" if no flash
spot appears.
After the settings, a prompt will pop up. Click "OK" and
then click "Finish" to confirm.
User Manual
remove the √ of
"state
changes
40