Table of Contents
Advertisement
4.3.5 Preset Management
GX2L/GX4L
2. Use the bar under the interface
Choose one layer and the bar shows its signal source, type in
position and size.click Set to confirm.
3. Layer Scale and Crop
Choose one layer needed to be adjusted,and type in its
position and size.
this icon means data related, when width is changed,
height will be changed as same proportion.
this icon means data not related, width and height need
to be filled respectively.
After setting the parameters,click
save the bank.
GX4L can save up to 5 banks.
Preset Management is designed to switch bank (scene
setting done in last step).
User Manual
in the right corner to
34
Advertisement
Table of Contents
