RGBlink GX2L User Manual page 30

Quatro
Library
GX2L/GX4L
Basic Parameters
Out Bright:0～255
Position
Adjust Start X/Y
Resolution
After setting width/height/fre,click<Set>to confirm
3D Set
Click 3D USE,and type in Window Width/Height
Library is to load files,which has been set and saved in
advance.
1. Click "Open File"to select the saved files.
2. Click "load"
3. Click"Send to RCard",the parameters will be
synchronized to the receiver card.
4. Click "Saved to RCard",and you can load the
parameters next time.
User Manual 30