Slave Unit:
Click Slave Unit
Slave Unit is to control multiple devices
simultaneously, which are connected to same
network. ("In the same network" means that the the
third section in the IP address digits are the same )
XPOSE do operation on one device, same operation
synchronized to other devices. For example, there is
another devices linked to the same network, one with
IP IP192.168.0.45
1. Set device numbers;
2. Select the IP of the device in the drop-down menu
for Device IP
3. click ON,the tow device are connected when the
red pot
turns to be green one
4. click OFF to disconnect, it could not control two
device at the same time.
3.2.3 Output|Input|Overview
Click
to enter interface as shown in the
right figure:
Note:
purple tip indicates input,
Q16pro
.
blue tip indicates output,
User Manual
yellow tip indicates communication.
27