Log In - Omron Microscan LVS 7000 Operation Manual

Table of Contents

Advertisement

Log In

Follow the steps below to log in to the LVS-7000.
1. Start the LVS-7000 software. The Welcome screen appears (see below).
Note: Users with the "Automatic Login" feature enabled bypass the screen below and
automatically access the screen where they are able to create a new job or load an existing job
(as shown in step 3 below). Refer to "Appendix G: Automatic Login" for more information on using
the "Automatic Login" feature.
2. Click the Log In button. The Login box appears (see below). Enter the Operator ID and Password, and
click OK.
When using the LVS-7000 for the first time, enter Admin in the Operator ID field and Admin in the
Password field.
Each password must consist of the following:
At least 8 characters
o
At least 1 letter from A to Z (case insensitive)
o
At least 1 number from 0 to 9
o
LVS-7000 Operations Manual Version 5.6.X
LVS-7000 Operations Manual Version 5.6.X
Page 8 of 187

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LVS 7000 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents