Omron Microscan LVS 7000 Operation Manual page 75

Error Condition
Not Assessed
Duplicate
LVS-7000 Operations Manual Version 5.6.X
sure that no characters are touching the sector box. The system will ignore
any characters that touch the sector box.
Rewinder/Printer is going faster than what the Camera and PC can handle.
LinesperInch or Camera MaxSpeed may be incorrectly set in the "Settings"
menu (these settings must be changed by Omron Microscan only).
Character string has previously been seen in this job.
LVS-7000 Operations Manual Version 5.6.X
Possible Cause
Page 75 of 187