Microsoft Windows Out-Of-Box-Experience (Oobe) - Matrox 4Sight EV6 Installation And Hardware Reference

88 Appendix C: Operating system recovery
Microsoft Windows Out-Of-Box-Experience
(OOBE)
When you start your Matrox 4Sight EV6 for the first time, Microsoft Windows
performs its Out-Of-Box-Experience (OOBE) customization steps. The OOBE
automatically performs initial customizations (such as setting the date and time),
and creates a default user, MtxUser, and password, Matrox. The OOBE also
generates a unique ID for your Matrox 4Sight EV6. At the end of your OOBE, a
Recommended actions window pops up and prompts you to set your time zone.
After you have set your time zone accordingly, ensure that User Account Control
(UAC) is off, and optionally choose to create a restore USB. To find the
Recommended actions window after completing the OOBE, open the OSConfig
utility and go to the Others tab. For information on the OOBE default settings,
refer to the OSreleasenotes.txt file on your Matrox 4Sight EV6 unit's C: drive.
If you backup your Matrox 4Sight EV6 with the OS backup option, the unique
ID and initial OOBE customizations are saved inside the OS backup (.wim file);
when you restore the OS backup, the unique ID is also restored. Be aware that if
two units (or other devices) on the same network have the same ID, you will have
issues. However, if you use the capture-for-deployment option to backup your
Matrox 4Sight EV6, the ID and initial OOBE customizations are not saved; when
you restore a captured backup on a Matrox 4Sight EV6 unit, Windows will
perform its OOBE and generate a new unique ID and initial OOBE
customizations for the unit.