Environmental Specifications; Matrox 4Sight Ev6 Electrical Specifications; Electrical Specifications - Matrox 4Sight EV6 Installation And Hardware Reference

Table of Contents

Advertisement

Environmental specifications

• Minimum/maximum ambient operating temperature: 0 to 50°C (32°F to 122°F).
• Minimum maximum storage temperature: -40 to 85°C (-40°F to 185°F).
• Operating relative humidity: 10 to 90% relative humidity (non-condensing).
• Storage humidity: 5 to 95% relative humidity (non-condensing).
• Pollution degree 2 environment.
• Designed for indoor use only.

Matrox 4Sight EV6 electrical specifications

Electrical specifications

• 9 V
to 27 V
(0% tolerance)
dc
dc
Steady-state current
Processor consumption
Energized power connection
2
Typical inrush current
Enabled PoE consumption
1. The inrush current during initial energized power cable connection, caused by the input filter capacitor, is 85 A (peak) and
lasts for approximately 200 μsec. When the power cable is already connected and the power supply is turned on, the inrush
current is insignificant and might produce a surge current of 0 to 5 A above the average current consumption, depending on
the slope of the power supply voltage rise.
2. These measurements were taken using one unit, under testing conditions.
3. This state is also known as going from mechanical-off to soft-off.
4. This state is also known as going from soft-off to full-on.
1. The input voltage range applies at the power connector of the unit. Ensure that the
selected power supply, wire gauge, and length of cable meet these requirements.
1
Matrox 4Sight EV6
15 A @ 9 V to 5 A @ 27 V (135 W)
25 W (Thermal design power)
85 A (peak) @ 24 V
V
In
Transition from G3 to G2/S5
dc
9 V
2 A
12 V
1.8 A
24 V
0.8 A
+48 V
(15.4 W) / port
dc
Environmental specifications
1
3
Transition from G2/S5 to S0
3 A
2 A
1 A
71
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents