Restore Windows 10 Iot Enterprise - Matrox 4Sight EV6 Installation And Hardware Reference

Table of Contents

Advertisement

94 Appendix C: Operating system recovery
WARNING!
Warning!
5. Insert a USB key into your USB drive. If using a backup file that you have
previously made and stored on a USB key, you will need to insert a second USB
key with that backup.
6. The Matrox Imaging ResQDisk utility will open. In the Select OS image area,
select to use the factory image or browse to the location where your required OS
backup .wim file is found and use that file. In the Select USB storage device
location area, select the USB drive that will be reformatted to a bootable USB
drive.
 Note that this will reformat your USB key and all its data will be erased.
7. Select Go and the process of making a bootable USB drive will begin. When this
operation completes successfully, your rescue USB key can then be used to either
deploy a capture-for-deployment backup, restore an OS backup, or recover the
operating system of your Matrox 4Sight EV6 unit to factory settings, depending
on the .wim file that you used to make the bootable USB.

Restore Windows 10 IoT Enterprise

You can restore the Windows 10 IoT Enterprise operating system partition of your
Matrox 4Sight EV6 unit, using the Matrox 4Sight EV6 Rescue utility with an
OS backup .wim file or a capture-for-deployment backup .wim file.
The restore operation will reformat and erase all data currently on the
Matrox 4Sight EV6 storage drive (SSD). If you have two (or more) partitions on
your Matrox 4Sight EV6 storage drive, or have external drives connected, select
the correct drive or disconnect from all external hard drives to prevent data being
erased by accident.
 The RECOVERY partition houses the Matrox 4Sight EV6 Rescue utility and
does not get reformatted if you restore an OS backup .wim file from the Matrox
Rescue utility console. However, if you use a rescue USB key with a
capture-for-deployment backup .wim file (W10EV6.wim), or restore to factory
default settings file (W10Ex64EV6.wim), then both the RECOVERY and OS
partitions are reformatted.

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Matrox 4Sight EV6

Table of Contents