Matrox 4Sight EV6 Installation And Hardware Reference page 90

90 Appendix C: Operating system recovery
WARNING!
5. Now, in audit mode (administrative mode), open the OSConfig utility and select
the Capture OS tab; then, click on the Reboot and launch capture tool button.
6. When the reboot process completes, a list of possible options are displayed. Click
on the Troubleshoot option and then on the Matrox Rescue Utility option.
7. When the Matrox Rescue Utility dialog opens, you must read the license
agreement. When done, click on the I agree button to accept the license
agreement.
8. The next page is presented, with an option already selected: Capture the OS for
deployment; leave this option as is. Below this, you can specify the location of
your USB key. Ensure your USB key has a minimum of 16 Gbytes. If you do not
already have your USB key connected, you can do so now. Once you have selected
the location of the USB key, you can press OK and the process will begin.
This will reformat your USB key and all data will be erased.
The Matrox 4Sight EV6 Rescue utility configures the USB key to be a rescue USB
key with all the necessary settings to restore your capture-for-deployment backup
.wim file onto other Matrox 4Sight EV6 units.
9. When the process completes, a message dialog opens, explaining what was done.
Click on the OK button to perform a shut down and reboot of Windows 10 IoT
Enterprise.
To use the configured USB key to restore the operating system partition of your
Matrox 4Sight EV6, or to configure another Matrox 4Sight EV6, refer to the
Restore Windows 10 IoT Enterprise section, later in this appendix.