Connecting Peripheral Devices - Matrox 4Sight EV6 Installation And Hardware Reference

26 Chapter 2: Getting started with your Matrox 4Sight EV6 unit
Front panel
3
4
Back panel
Power
button
Caution

Connecting peripheral devices

The following sections describe how to connect various devices to the external
connectors on the Matrox 4Sight EV6 unit.
PoE
USB 3.0
1
2
Input
Output
Be sure to turn off the power to the unit and all peripherals, as well as unplug the
power from the unit before adding or removing devices.
Matrox 4Sight EV6 has connectors on its front and back panels to connect to the
following devices:
• 6 Gigabit Ethernet interfaces to connect to GigE Vision cameras and industrial
and enterprise networks. There are 4 Gigabit Ethernet interfaces that support
Power-over-Ethernet (PoE) and an additional 2 Gigabit Ethernet interfaces that
do not. Typically, you connect your GigE Vision cameras to the ports that support
PoE.
USB 3.0 USB 2.0
4 2 2
3 1 1
LAN LAN
Yellow - Act/Link
2 1 Green - 100 Mbps
Orange - 1 Gbps
COM1
Audio RS -232 / 485
OUT
RS-232
IN
COM2
DVI-I DP
HDD On
Input Rating
9-27 VDC
1 - A 5 5
LEDs