Matrox 4Sight EV6 Installation And Hardware Reference page 74

74 Appendix B: Technical reference
Warning
Warning
USB 3.0 connectors
The 4 USB 3.0 connectors are standard rectangular, Series "A", 9-pin receptacles.
These connectors are backwards compatible with 2.0/1.1. The USB 3.0 ports
support SuperSpeed, which operates at up to 5.0 Gbps. The pinout of these USB
3.0 connectors is described in the Specification v3.0 from the Implementers
Forum. These connectors are typically used to connect USB3 Vision cameras.
In environments where your Matrox 4Sight EV6 is subjected to vibrations,
connect your third-party device to your unit using locking cables.
• Operating voltage and maximum current: 5 V, 900 mA.
• Over-current protection: Yes.
USB 2.0 connectors
The 2 USB 2.0 connectors are standard rectangular, Series "A", 4-pin receptacles.
The pinout of these standard connectors is described in the Specification v2.0
from the Implementers Forum.
In environments where your Matrox 4Sight EV6 is subjected to vibrations,
connect your third-party device to your unit using locking cables.
• Operating voltage and maximum current: 5 V, 500 mA.
• Over-current protection: Yes.