Mass Storage - Matrox 4Sight EV6 Installation And Hardware Reference

68 Appendix B: Technical reference
Important
• 2 video output ports (DisplayPort and DVI-I) that allow you to connect either
two digital display devices or one digital and one analog display device; they can
be enabled simultaneously for a dual-monitor display (extended desktop or cloned
desktop). Only the DVI-I port supports analog output. The DVI-I port also
supports the HDMI 1.4 standard.
Display Device
Digital display device
Digital display device
Digital display device
Analog display device
1. For more information, refer to the specification of the Intel Core i5-7442EQ processor.
2. To access HDMI resolution, you must use a DVI-to-HDMI adapter. This adapter is not included with your unit.
3. To connect an analog device, you must use the DVI-to-HD15 adapter included with your unit.
• 1 audio controller with support for line-level stereo audio input and output (for
example, from a microphone with a pre-amplifier or a speaker with an amplifier).
• Power management features.

Mass storage

1
• A 64-Gbyte M.2 solid state drive (SSD) comes pre-installed from the factory in
the Matrox 4Sight EV6 unit. This SSD is connected to an M.2 2280 M key
connector (which supports PCIe 3.0 x 2 NVMe M.2 SSDs and SATA 3.0 M.2
SSDs).
• 2 SATA data connectors, which can be used to attach up to 2 more mass storage
devices.
Matrox 4Sight EV6 only supplies 5 V to the SATA power connector. Therefore,
storage devices requiring a 12 V supply are not supported.
1. The size of the SSD is subject to change without notice, but will at minimum be
64 Gbytes.
Connector
DisplayPort
DVI-I (using single link DVI
standard)
2
DVI-I (using HDMI standard )
3
DVI-I
Maximum display resolution
4096 x 2304 @ 60Hz, 24bpp
2560 x 1600 @ 30 Hz, 24bpp
or
1920x 1200 @ 60 Hz, 24bpp
4096 x 2160 @ 30 Hz, 24bpp
2048 x 1536 @ 50 Hz, 24bpp
or
2048 x 1152 @ 60 Hz, 24bpp
1