Overview - Matrox 4Sight EV6 Installation And Hardware Reference

52 Chapter 3: Adding devices to Matrox 4Sight EV6

Overview

Matrox 4Sight EV6 is designed to accommodate hardware additions through its
internal connectors:
• An M.2 connector. An M.2 mass storage device comes already attached from the
factory.
• Two SATA 3.0 data connectors and one SATA 3.0 power connector. Connect a
third-party SATA mass storage device to provide additional mass storage for your
unit.
The following diagrams provides a reference to these connectors.
Matrox 4Sight
Internal connectors
M.2
connector
SATA power
connector
EV6 motherboard
Back panel
Recovery
connector
SATA data
connectors
Front panel
RS-485
termination
connector