Matrox 4Sight EV6 Installation And Hardware Reference page 76

76 Appendix B: Technical reference
Pin Signal
1 TX2-
2 TX2+
3 GND
4-5 NC
6 SCLK
7 SDATA
8 VSYNC
9 TX1-
10 TX1+
11 GND
12-13 NC
14 +5V
15 GND
16 HPD
17 TX0-
18 TX0+
19 GND
20-21 NC
22 GND
23 TXC+
24 TXC-
C1 RED
C2 GREEN
C3 BLUE
C4 HSYNC
C5 GND
 Note that one DVI (male) to HD15 (female) adapter (DVI-to-HD15) is included
with your unit. This adapter allows you to connect a VGA device (such as, a
monitor) to your unit's DVI connector. To connect to an HDMI display device,
you need to purchase and use a DVI-to-HDMI adapter.
I/O Description
O Transmission Data Line 2-.
O Transmission Data Line 2+.
- Ground.
- Not connected.
I/O DDC data clock line.
I/O DDC serial data line.
O Vertical synchronization.
O Transmission Data Line 1-.
O Transmission Data Line 1+.
- Ground.
- Not connected.
O +5 V
dc
- Ground.
I/O Hot-plug detect.
O Transmission data line 0-.
O Transmission data line 0+.
- Ground.
- Not connected.
- Ground.
O Transmission data line Clock+.
O Transmission data line Clock-.
O Red.
O Green.
O Blue.
O Horizontal synchronization.
- Ground.