Additional Components - Prince Antec Controls Retrofit Manual

Additional Components

The additional components for each available option are outlined in this section.
Lid
Enclosure Bracket
Option #1
Option #2
6 | VVR– Manual | AntecControls.com
Controls Enclosure
The venturi valve retrofit has an option to order a controls enclosure. The controls enclosure
comes with two different components.
Component Quantity
Enclosure Bracket 1
Enclosure Lid 1
Potentiometer
The venturi valve retrofit has an option to order a potentiometer. The potentiometer comes
in two different options.
Component Quantity
Potentiometer 1
(Option #1)
Potentiometer 1
(Option #2)
NOTE: When ordering potentiometers a specials quote will need to be entered in Antec
Select. Please contact the Antec Applications team for assistance with the specials quote.
VVR - MANUAL
Description
Enclosure bracket mounted to the base plate of the
venturi valve.
Used to cover the enclosure.
CAUTION
When units are shipped mounted in an
enclosure, the label will be shown on the
enclosure. This will indicate where the
controller is to be installed.
Description
Potentiometer with cable, potentiometer plate, and
shaft coupler. This potentiometer assembly is the
most commonly used option and is used with base
plates that have slotted design
NOTE: See the Potentiometer Installation
for more detail.
Potentiometer with cable, potentiometer plate,
mounting bracket, shaft couplers and extension pin.
This potentiometer assembly is required when the
existing base plate does not have tab slots.
section