Table of Contents
Advertisement
23 | VVR– Manual | AntecControls.com
STEP 4
Click on PACE to enter the PACE section of the software.
STEP 5
Toolbox will begin by loading linestrings.
After this is complete, all PACE controllers detected on the Room Information Network
(RIN) will be displayed on the home screen.
NOTE:
If configuring POT curves for the whole room, all valves should be visible.
STEP 6
Click on the valve that requires a POT curve.
NOTE:
The valve tag should populate and VVR should be displayed just to the right of
the valve icon.
STEP 7
Add an actuator as an analog output. Add any additional inputs or outputs as
necessary.
VVR - MANUAL
CAUTION
For Single and Dual valves (One POT
Curve), only one airflow device is
required. For Triple valves (Two POT
Curves), two airflow devices are
required. Ensure the correct POT curve
is configured for the correct airflow
Advertisement
Table of Contents
