Getting Started With The Vvr; In The Box - Prince Antec Controls Retrofit Manual

GETTING STARTED WITH THE VVR

CAUTION
Please ensure all components are included in the box.
Do not proceed if any components are missing, contact
your local Antec Controls representative.

In the Box

For each of the available controllers the order includes the following components outlined in this section.
3 | VVR– Manual | AntecControls.com
PACE (Single Valve)
The single venturi valve retrofit for PACE ships with several different components. The
components are outlined in this section for a single venturi valve with a PACE.
Component Quantity
PACE 1
Green Pressure 1
Tubing
Red Pressure 1
Tubing
Actuator 1
Mounting Bracket 1
with Linkages
Unit is shipped with label on the bottom of the PACE to indicate which valve it should
NOTE:
be installed on. The image on the left hand side shows the bottom of a PACE with the
corresponding identification label.
VVR - MANUAL
Description
Single PACE controller.
The low-pressure tubing comes with a length of
tubing and a connector tee.
The high-pressure tubing comes with a length of
tubing and a connector tee.
The actuator comes mounted on the mounting
bracket and shaft.
The single venturi valve mounting bracket and
linkages comes pre-assembled. The unit just needs
to be positioned and fastened with 4 self-tapping
screws.
CAUTION
When units are shipped mounted in an
enclosure, the label will be shown on the
enclosure.