Table of Contents
Advertisement
18 | VVR– Manual | AntecControls.com
3"
STEP 8B
Pressure ports must be mounted facing the right-hand side of the enclosure.
PACE is mounted a minimum of 3" from the right side of the enclosure.
STEP 8C
PACE is mounted above the base channnel on the valve.
STEP 9
To mount the FHC, use the mounting bracket and install 4 self-tapping screws.
To mount the FHC in the correct location please ensure the following:
1.
The controller leaves enough room for the pressure tubing to be connected.
2.
There is sufficient space for the 3-pole terminal block to be mounted and wired in.
NOTE:
Self-tapping screws are not provided with the VVR. The recommended size is a 3/8"
self-tapping screw for metal.
STEP 10
To mount the LMX, use the mounting bracket and install 4 self-tapping screws.
To mount the LMX in the correct location pleasure ensure the following:
1.
The controller leaves enough room for the pressure tubing to be connected.
2.
There is sufficient space for the 3-pole terminal block to be mounted and wired in.
Self-tapping screws are not provided with the VVR. The recommended size is a 3/8"
NOTE:
self-tapping screw for metal.
VVR - MANUAL
Advertisement
Table of Contents
