About This Document; Compatibility; Intended Audience; Additional Documentation - Invertek Drives Optidrive E3 ODE-3 Series User Manual

1. About This Document

1.1. Compatibility

This Document is for use with the following firmware versions:
Optidrive E3: Version 3.10
Optidrive Compact 2 Basic: Version 2.07
This document provides information regarding parameters and programming for all Invertek Drives' Optidrive E3 product families
including the Optidrive E3 based Compact 2 Basic units.
For information regarding installation and technical data, refer to the relevant Installation Guide document.
Invertek Drives Ltd adopts a policy of continuous improvement and whilst every effort has been made to provide accurate and up to
date information, the information contained in this User Guide should be used for guidance purposes only and does not form the part
of any contract.
The information in this user guide relates to the functionality of the firmware version as stated above. Prior versions of firmware may not
fully support all functions as described. If necessary, firmware updates may be carried out using Optitools Studio PC software.

1.2. Intended Audience

This document provides an overview of the parameters and functions of the Optidrive product ranges and provides the necessary
technical information to allow competent users to understand the functions of the parameters.

1.3. Additional Documentation

This document forms part of a package of documents intended to provide information about the Optidrive product range. Related
documents are shown in the table below.
Product Range
Enclosure
1
Version
Quick Start Guide
Declaration of Conformity
Installation Guide
Parameter List
Fieldbus Guide
4 | Fieldbus Guide | Version 1.00
Optidrive E3 ODE-3-...
IP20 IP66
All A B
EN EN
DE DE
SP SP
FR FR
PT
PT
IT IT
PO PO
EN
EN
DE
SP
FR
PT
IT
PO
Optidrive Compact 2-Basic OPC-2-...E
C D
EN
DE
SP
FR
PT
IT
PO
EN
DE
SP
FR
PT
IT
PO
All
All
EN
DE
EN
EN
DE
www.invertekdrives.com