Lenovo ThinkSystem SR250 Messages And Codes Reference page 99

SNMP Trap ID: 9
CIM Prefix: PLAT CIM ID: 0811
User Action:
Information only; no action is required.
• FQXSPSB0000N: The System [ComputerSystemElementName] has encountered a motherboard
failure.
This message is for the use case when an implementation has detected that a fatal motherboard failure in
the system.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0795
User Action:
Complete the following steps until the problem is solved:
1. Unplug and plug in power to restart the system.
2. If the problem still exist, please updgrade the firmware to the level you have or newer then restart.
3. If the problem still exist, please contact serivce for further support.
• FQXSPSB2000I: The System [ComputerSystemElementName] has detected a POST Error
deassertion.
This message is for the use case when an implementation has detected that Post Error has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0185
User Action:
Information only; no action is required.
• FQXSPSD0000I: The [StorageVolumeElementName] has been added.
This message is for the use case when an implementation has detected a Drive has been Added.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: PLAT CIM ID: 0162
User Action:
Information only; no action is rqeuired.
• FQXSPSD0001L: The [StorageVolumeElementName] has been disabled due to a detected fault.
This message is for the use case when an implementation has detected a Drive was Disabled due to fault.
.
Chapter 2 XClarity Controller events
95