Lenovo ThinkSystem SR250 Messages And Codes Reference page 47

CIM Prefix: IMM CIM ID: 0198
User Action:
Information only; no action is required
• FQXSPFC4005I: UEFI deployment boot mode has been disabled.
UEFI deployment boot mode has been disabled
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0199
User Action:
Information only; no action is required
• FQXSPFW0002N: The System [ComputerSystemElementName] encountered a firmware hang.
This message is for the use case when an implementation has detected a System Firmware Hang.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: System - Boot failure
SNMP Trap ID: 25
CIM Prefix: PLAT CIM ID: 0186
User Action:
Complete the following steps until the problem is solved:
1. Unplug and plug in power to restart the system.
2. If the problem still exist, please updgrade the firmware to the level you have or newer then restart.
3. If the problem still exist, please contact serivce for further support.
• FQXSPFW2000I: The System [ComputerSystemElementName] has detected a POST Error
deassertion.
This message is for the use case when an implementation has detected that Post Error has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0185
User Action:
Information only; no action is required.
• FQXSPFW2001I: The System [ComputerSystemElementName] has detected a POST Error
deassertion.
This message is for the use case when an implementation has detected that Post Error has deasserted.
Severity: Info
Serviceable: No
.
Chapter 2 XClarity Controller events
43