Lenovo ThinkSystem SR250 Messages And Codes Reference page 157

• FQXPMOS0005K: BMC communication failed: DRIVER Mount Failure.
Severity: Warning
User Action:
1. Ensure proper operation of the virtual USB connection.
2. Restart BMC via BMC setting under uEFI setup on LXPM left panel and retry the OS deployment.
3. Perform AC reset if the error still exist.
Note: When performing AC reset, after power off AC, wait several seconds before power on AC.
After AC power is restored, power on the host system.
4. Retry OS deployment.
• FQXPMOS0006K: BMC communication succeeded. Volume Name MISMATCHED.
Severity: Warning
User Action:
1. Restart BMC via BMC setting under uEFI setup on LXPM left panel and retry the OS deployment.
2. Perform AC reset if the error still exist.
Note: When performing AC reset, after power off AC, wait several seconds before power on AC.
After AC power is restored, power on the host system.
3. Retry OS deployment.
• FQXPMOS0007K: Failed to read License RTF file.
Severity: Warning
User Action:
1. Restart BMC via BMC setting under uEFI setup on LXPM left panel and retry the OS deployment.
2. Perform AC reset if the error still exist.
Note: When performing AC reset, after power off AC, wait several seconds before power on AC.
After AC power is restored, power on the host system.
3. Retry OS deployment.
• FQXPMOS0008K: Please make sure the Ethernet cable has been plugged into your computer and
your network settings are correct.
Severity: Warning
User Action:
1. Ensure proper operation of SMB/CIFS and NFS communications (make sure the Ethernet cable has
been plugged and network settings are correct.).
2. Retry CIFS and NFS installation.
• FQXPMOS0009K: Current System Boot Mode is Legacy. LXPM OS installation only support UEFI
Mode.
Severity: Warning
User Action:
1. Change boot mode to UEFI mode via Boot Mode on right panel on Getting Started interface.
2. Retry OS deployment.
.
Chapter 4 XClarity Provisioning Manager events
153