Lenovo ThinkSystem SR250 Messages And Codes Reference page 87

SNMP Trap ID: 40
CIM Prefix: PLAT CIM ID: 0050
User Action:
Complete the following steps:
1. This message could occur with messages about other Processor configuration problems. Resolve
those messages first
2. If the problem persists, ensure that matching processors are installed (i.e., matching option part
numbers, etc)
3. Verify that the Processor's are installed in the correct sockets according to the service information for
this product. If not, correct that problem.
4. Check Lenovo support site for an applicable service bulletin or UEFI firmware update that applies to
this Processor error.
5. Contact service for further support.
• FQXSPPU2000I: [ProcessorElementName] in slot [SlotElementName] has been removed.
This message is for the use case when an implementation has detected a Processor has been Removed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0035
User Action:
Information only; no action is required.
• FQXSPPU2001I: An Over-Temperature Condition has been removed on [ProcessorElementName].
This message is for the use case when an implementation has detected a Over-Temperature Condition
has been Removed for Processor.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Temperature
SNMP Trap ID: 0
CIM Prefix: PLAT CIM ID: 0037
User Action:
Information only; no action is required.
• FQXSPPU2002I: The Processor [ProcessorElementName] is no longer operating in a Degraded
State.
This message is for the use case when an implementation has detected a Processor is no longer running
in the Degraded state.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - CPU
SNMP Trap ID: 42
CIM Prefix: PLAT CIM ID: 0039
.
Chapter 2 XClarity Controller events
83