Lenovo ThinkSystem SR250 Messages And Codes Reference page 25

Hide thumbs Also See for ThinkSystem SR250:
Table of Contents

Advertisement

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPUN0026G
Device [LogicalDeviceElementName] has been added.
FQXSPUN0056G
Sensor [SensorElementName] has asserted.
FQXSPBR4003I
Platform Watchdog Timer expired for [arg1].
FQXSPBR4007I
Management Controller [arg1]: Configuration restoration from a file by
user [arg2] failed to complete.
FQXSPBR4008I
Management Controller [arg1]: Configuration restoration from a file by
user [arg2] failed to start.
FQXSPCA0002M
Numeric sensor [NumericSensorElementName] going low (lower
critical) has asserted.
FQXSPCA0009M
Numeric sensor [NumericSensorElementName] going high (upper
critical) has asserted.
FQXSPCA0011N
Numeric sensor [NumericSensorElementName] going high (upper
non-recoverable) has asserted.
FQXSPCA0017M
Sensor [SensorElementName] has transitioned to critical from a less
severe state.
FQXSPCA0019N
Sensor [SensorElementName] has transitioned to non-recoverable
from a less severe state.
FQXSPCR0001N
Sensor [SensorElementName] has transitioned to non-recoverable
from a less severe state.
FQXSPFW0002N
The System [ComputerSystemElementName] encountered a firmware
hang.
FQXSPIO0001L
The connector [PhysicalConnectorElementName] has encountered a
configuration error.
FQXSPIO0003N
A diagnostic interrupt has occurred on system
[ComputerSystemElementName].
FQXSPIO0004L
A bus timeout has occurred on bus [SensorElementName].
FQXSPIO0006N
A software NMI has occurred on system
[ComputerSystemElementName].
FQXSPIO0011N
An Uncorrectable Error has occurred on [SensorElementName].
FQXSPMA0005N
Subsystem [MemoryElementName] has insufficient memory for
operation.
FQXSPMA0012M
An Over-Temperature Condition has been detected on the
[PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
FQXSPMA0013N
The System [ComputerSystemElementName] has detected no
memory in the system.
FQXSPMA0015L
Redundancy Lost for [RedundancySetElementName] has asserted.
FQXSPOS4002I
Watchdog [arg1] Failed to Capture Screen.
FQXSPOS4003I
Platform Watchdog Timer expired for [arg1].
FQXSPOS4010I
OS Crash Video Capture Failed.
Severity
Warning
Warning
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
.
Chapter 2
XClarity Controller events
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7y517y527y727y73

Table of Contents