Lenovo ThinkSystem SR250 Messages And Codes Reference page 144

Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4081I: Host Power-On password has been cleared.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4082I: Host Admin password has been changed.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4083I: Host Admin password has been cleared.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4084I: Host boot order has been changed.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4085I: Host WOL boot order has been changed.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPW0001L: CMOS has been cleared.
Severity: Warning
User Action:
Complete the following steps:
1. If the CMOS clear was user initiated this event can be safely ignored and no further action is required.
2. If the system was recently installed, moved, or serviced, make sure the battery is properly seated.
3. Check Lenovo support site for an applicable service bulletin or firmware update that applies to this
error.
4. If the problem persists, collect Service Data logs.
5. Contact Lenovo Support.
• FQXSFSM0002N: Boot Permission denied by Management Module: System Halted.
Severity: Warning
User Action:
Complete the following steps:
140
ThinkSystem SR250 Messages and Codes Reference