Lenovo ThinkSystem SR250 Messages And Codes Reference page 153

Severity: Info
User Action:
Information only; no action is required.
• FQXPMCL0008K: Failed to export uefi settings.
Severity: Warning
User Action:
1. Ensure proper connection to USB/network drive and retry to export uEFI setting.
2. Reboot and try the uEFI setting export again.
3. If the error still occurs, contact service to support.
• FQXPMCL0009I: Import uefi settings successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMCL0009K: Failed to import uefi settings.
Severity: Warning
User Action:
1. Ensure proper connection to USB/network drive and retry the uEFI setting import.
2. Ensure that same system model type to import the uEFI setting and UEFI version should be the same.
3. Reboot and try the cloning again.
4. If the error still occurs, contact service to support.
• FQXPMCL0010I: Export bmc settings successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMCL0010K: Failed to export bmc settings.
Severity: Warning
User Action:
1. Restart BMC via BMC setting under uEFI setup on LXPM left panel.
2. Perform AC reset if the error still exist.
Note: When performing AC reset, after power off AC, wait several seconds before power on AC.
After AC power is restored, power on the host system.
3. Retry to export BMC setting.
4. If the error still occurs, contact service to support.
• FQXPMCL0011I: Import bmc settings successfully.
Severity: Info
User Action:
.
Chapter 4 XClarity Provisioning Manager events
149