Table 3. Events organized by severity (continued)
Message String
Event ID
FQXSFPU4045G
Physical Presence is not asserted, abort TPM Firmware upgrade.
FQXSFPU4050G
Failed to update TPM Firmware.
FQXSFPU4051G
Undefined TPM_TCM_POLICY found
FQXSFPU4052G
TPM_TCM_POLICY is not locked
FQXSFPU4053G
System TPM_TCM_POLICY does not match the planar.
FQXSFPU4054G
TPM/TCM card logical binding has failed.
FQXSFPW0001L
CMOS has been cleared.
FQXSFSM0002N
Boot Permission denied by Management Module: System Halted.
FQXSFSM0003N
Timed Out waiting on boot permission from Management Module:
System Halted.
FQXSFSM0004M
An XCC communication failure has occurred.
FQXSFSR0001M
[arg1] GPT corruption detected, DiskGUID: [arg2]
FQXSFSR0003G
The number of boot attempts has been exceeded. No bootable
device found.
FQXSFTR0001L
An invalid date and time have been detected.
FQXSFDD0004M
DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required
Controller.
FQXSFIO0010M
An Uncorrectable PCIe Error has Occurred at Bus [arg1] Device [arg2]
Function [arg3]. The Vendor ID for the device is [arg4] and the Device
ID is [arg5]. The Physical slot number is [arg6].
FQXSFIO0011M
A PCIe parity error has occurred on Bus [arg1] Device [arg2] Function
[arg3]. The Vendor ID for the device is [arg4] and the Device ID is
[arg5]. The Physical slot number is [arg6].
FQXSFIO0012M
A PCIe system error has occurred on Bus [arg1] Device [arg2]
Function [arg3]. The Vendor ID for the device is [arg4] and the Device
ID is [arg5]. The Physical slot number is [arg6].
FQXSFMA0001M
DIMM [arg1] has been disabled due to an error detected during POST.
[arg2]
FQXSFMA0002M
An uncorrectable memory error has been detected on DIMM [arg1] at
address [arg2]. [arg3]
FQXSFMA0003K
A memory mismatch has been detected. Please verify that the
memory configuration is valid. [arg1]
FQXSFMA0004N
No system memory has been detected. [arg1]
FQXSFMA0005N
Memory is present within the system but could not be configured.
Please verify that the memory configuration is valid. [arg1]
FQXSFMA0008M
DIMM [arg1] has failed the POST memory test. [arg2]
FQXSFMA0027K
Invalid memory configuration (Unsupported DIMM Population)
detected. Please verify memory configuration is valid.[arg1]
FQXSFMA0029L
The [arg1] PFA Threshold limit has been exceeded on DIMM [arg2].
[arg3]
Severity
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
.
127
Chapter 3
UEFI events