Lenovo ThinkSystem SR250 Messages And Codes Reference page 152

Information only; no action is required.
• FQXPMCL0005K: Current System Boot Mode is Legacy. OS Clone only support UEFI Mode.
Severity: Warning
User Action:
1. Change Boot mode to UEFI mode (UEFI Setup -> Boot Manager -> Boot Modes -> System Boot
Mode and select UEFI Mode.)
2. Retry the cloning function.
• FQXPMCL0006I: Export raid config successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMCL0006K: Failed to export raid config.
Severity: Warning
User Action:
1. Check the following Lenovo support site for information on supported RAID adapters. http://www.
lenovo.com/us/en/serverproven/index.shtml
2. Ensure RAID adapter, LXPM, and UEFI firmware are at the latest levels.
3. Ensure the state of the RAID adapter and disk drives are normal.
4. Verify proper physical connection of the disk drive and RAID adapter.
5. Reboot the machine and retry RAID configuration export.
6. If the error still occurs, contact service to support.
• FQXPMCL0007I: Import raid config successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMCL0007K: Failed to import raid config.
Severity: Warning
User Action:
1. Check the following Lenovo support site for information on supported RAID adapters. http://www.
lenovo.com/us/en/serverproven/index.shtml
2. Ensure RAID adapter, LXPM, and UEFI firmware are at the latest levels.
3. Ensure the state of RAID adapter and disk drives are normal.
4. Ensure proper physical connection of the disk drive and RAID adapter.
5. Ensure the platform and RAID config is the same.
6. Reboot the machine and retry RAID configuration import.
7. If the error still occurs, contact service to support.
• FQXPMCL0008I: Export uefi settings successfully.
148
ThinkSystem SR250 Messages and Codes Reference