Lenovo ThinkSystem SR250 Messages And Codes Reference page 154

Information only; no action is required.
• FQXPMCL0011K: Failed import bmc settings.
Severity: Warning
User Action:
1. Ensure BMC version is the same.
2. Restart BMC via BMC setting under uEFI setup on LXPM left panel.
3. Perform AC reset.
Note: When performing AC reset, after power off AC, wait several seconds before power on AC.
After AC power is restored, power on the host system.
4. Retry to import BMC setting.
5. If the error still occurs, contact service to support.
• FQXPMEM0001M: Unable to locate LXPM firmware image
Severity: Error
User Action:
1. Restart BMC via BMC setting under uEFI setup on LXPM left panel.
2. Perform AC reset if the error still exist.
Note: When performing AC reset, after power off AC, wait several seconds before power on AC.
After AC power is restored, power on the host system.
3. If the error still occurs, contact service to support.
• FQXPMEM0002I: LXPM firmware image found. Starting LXPM
Severity: Info
User Action:
Information only; no action is required.
• FQXPMEM0003I: LXPM has exited. Control returned to UEFI
Severity: Info
User Action:
Information only; no action is required.
• FQXPMEM0004I: Launching diagnostic program
Severity: Info
User Action:
Information only; no action is required.
• FQXPMEM0005I: boot diagnostic program success
Severity: Info
User Action:
Information only; no action is required.
• FQXPMEM0006M: Unable to locate diagnostic firmware image
150
ThinkSystem SR250 Messages and Codes Reference