Lenovo ThinkSystem SR250 Messages And Codes Reference page 139

3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFPU0020I: The UEFI firmware image capsule signature is invalid.
Severity: Info
User Action:
Complete the following steps:
1. Reboot the system. Reflash UEFI image.
2. If error does not persist no additional recovery action is required.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFPU0021G: Hardware physical presence is in asserted state.
Severity: Warning
User Action:
Complete the following steps:
1. Complete any administrative tasks requiring the TPM physical presence switch to be in the "ON"
position.
2. Restore the physical presence switch to the "OFF" position and reboot the system.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFPU0021I: The TPM physical presence state has been cleared.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU0022G: The TPM configuration is not locked.
Severity: Warning
User Action:
Complete the following steps:
1. Reboot the system.
2. If the problem persists, collect Service Data logs.
3. Contact Lenovo Support.
• FQXSFPU0023G: Secure Boot Image Verification Failure Warning.
Severity: Warning
User Action:
Complete the following steps:
1. It's a security warning message when user want to boot from an unauthorized UEFI image or OS
while Secure Boot is enabled and Secure Boot Mode is in User Mode. If customer does not want to
boot any unauthorized UEFI image or OS, please remove that bootable device.
2. If customer does want to boot this unauthorized UEFI image or OS, there're two ways to allow
system boot from this unauthorized image, the first is to disable Secure Boot, the second is to enroll
the unauthorized image into DB(Authorized Signature Database).b.Enroll the unauthorized UEFI
. 135
Chapter 3 UEFI events