Lenovo ThinkSystem SR250 Messages And Codes Reference page 168

User Action:
1. Press "Update" button on VPD update page.
2. Perform AC reset if step 1 failed.
Note: When performing AC reset, after power off AC, wait several seconds before power on AC.
After AC power is restored, power on the host system.
3. If the error still occurs, contact service to support.
• FQXPMVD0003I: Update VPD data successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMVD0011K: Failed to get the TPM/TPM card/TCM policy status
Severity: Warning
User Action:
1. Press "Back" button and press "Update VPD..." button again.
2. Perform AC reset if step 1 failed.
Note: When performing AC reset, after power off AC, wait several seconds before power on AC.
After AC power is restored, power on the host system.
3. If the error still occurs, contact service to support.
• FQXPMVD0012K: Failed to set the TPM/TPM card/TCM policy
Severity: Warning
User Action:
1. Press "Apply" button on VPD update page.
2. Reboot the system if step 1 failed.
3. If the error still occurs, contact service to support.
164
ThinkSystem SR250 Messages and Codes Reference