Installation Location; Installation - Pylontech PowerCube-H1 Product Manual

3.4 Installation Location

Make sure that the installation location meets the following conditions:
The area is completely water proof.

The floor is flat and level.

There are no flammable or explosive materials.

The ambient temperature is within the range from 0°C to 50°C.

The temperature and humidity is maintained at a constant level.

There is minimal dust and dirt in the area.

CAUTION
If the ambient temperature is outside the operating range, the battery pack stops operating to
protect itself. The optimal temperature range for the battery pack to operate is 0°C to 50°C.
Frequent exposure to harsh temperatures may deteriorate the performance and life of the
battery pack.

Installation

A. Put battery modules into cabinet and connect the cables:
① Connect the External Communication Cable, External Power Cable + and - and AC power
cable from Inverter;
② Put the control module and the battery modules into the cabinet;
③ Drive the 4 pcs screws, to fasten each module on the rack;
④ Connect the cables between battery modules and the control module;
The cables' installation sequence is as followed diagram:
18 / 23
17PIHV1101