Pylontech PowerCube-H1 Product Manual page 14

Standby Normal
Normal
Charge
Alarm
Protection
Normal
Discharge
Protection
Note: The flashing instructions, flash 1 - light 0.25s / off 3.75 seconds; flash 2 - 0.5s light / 0.5s off;
flash 3 - 0.5s light / 1.5s off.
Power Output Switch
Turn ON/OFF the MBMS power, and ON/OFF the power output of external power of control
modules.
12VDC Input
Take 12VDC power from outside (from control module or
AC/DC adaptor).
Flash
Off Off
1
Light Off Off
Off Light Off
Off Off Light
Flash
Off Off
3
Off Light Light
14 / 23
Off Off Off Off
The highest capacity
indicator LED flashes
(flash 2), others lighting
Off Off Off Off
Indicate based on
capacity
Off Off Off Off
Indicates Standby
Stop charging, ALM
lighting
Stop discharging, ALM
lighting
17PIHV1101